Forks

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- Slides over upper fork legs to prevent frame/fork contact - Works on 35mm boXXers only

- Blue polyurethane upgrade dust wipers and oil seals - Dual lip offers improved seal with lower stiction - Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings - Fox 40mm kits include wipers and seals

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 137mm - Brake Mount: Caliper - Rake: 35mm - Axle-to-Crown: 315mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 40mm

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 180mm

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels

• Cantilever brake mounts • 45mm rake • High-tensile steel construction • Threaded fork

- Cantilever brake mounts - 45mm rake - Hi-tensile steel construction - Steerer Type: Threaded - Steerer Size: 1-inch - Brake Mount: Cantilever - Rake: 45mm - Axle-to-Crown: 405mm - Thread Length: 120mm - Axle: QR 9mm

• Caliper brake mounts • 385mm axle-to-crown • Chromoly construction • 1-inch steerer diameter • Threaded fork

• Chromoly construction • V-brake mounts • I.S. disc mount • Fits bikes with 20-inch wheels • Steerer length: 250mm

- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"

Dimension Road Forks are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Weight: 692g - Wheel Size: 700c

700c Hybrid fork with Cantilever Mounts - Forged dropouts with eyelets, straight-gauge oval-tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - Welded unicrown construction - Clearance for 50mm wide fenders (1 1/8-inch) - Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch) - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch) - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50 mm - S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch) - Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch) - Steerer Type: Straight - Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch) - Wheel Size: 700c

Dimension Road Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 - Steerer Type: Straight - Weight: 773g (1-inch); 780g (1 1/8-inch) - Wheel Size: 700c

• Cantilever brake mounts • 45mm rake • Chromoly construction • 1 1/8-inch steerer diameter • Threadless fork

• Caliper brake mounts • 45mm rake • Chromoly construction • Threadless fork • 300mm steerer length

- Hi-Tensile steel construction - 135mm fat tire front hub spacing - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Steerer Length: 275mm - Brake Mount: Is Disc - Rake: 45mm - Axle-to-Crown: 450mm - Race Diameter: 30mm - Axle: QR 9mm

• High-tensile steel construction • Springer suspension • Threaded • 1-inch diameter (7/8-inch inner diameter) • 20-inch version steerer length: 148mm • 26-inch version steerer length: 180mm

The beautiful Big Block track fork is now available in 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike. - Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts - Axle to Crown Measurement: 375mm - Offset: 32mm - Steerer Tube Length: 300mm - Spacing: 100mm - Tire Clearance: 32c - Brakes: Mid Reach

• Cantilever brake mounts • Chromoly construction • Threadless fork • For 26-inch wheels • 250mm steerer length • 1 1/8-inch steerer diameter

Looking to go rigid? Then check out Salsa's 80mm suspension-corrected CroMoto Grande mountain bike fork. This chromoly beauty boasts ISO disc tabs for premium braking and it's 1-1/8" straight steerer lets you use it on older frames, or brand-spanking-new ones. It features Salsa's famous, forward-facing stainless steel fork ends and has room for tires up to 90mm wide. Plus, it comes with fender eyelets so you can stay clean even when it's sloppy out. - Salsa Classico CroMoly - Forward-facing, stainless steel dropouts - 1-1/8? threadless steerer (260mm) - 468mm axle-to-crown - 45mm rake - ISO disc tabs - Tire clearance = 90mm - Fender eyelets -1080g with full-length steerer tube

Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut

The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut

Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3" - Weight: 1133g uncut

The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut

The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 700c = 390mm - Offset: 45mm - Steerer: 700c (56–64cm frames) = 350mm - Tire Clearance: 700c x 45mm - Weight: 700c = 2.3 lb uncut

Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!

Salsa Firestarter Fork - Mid-blade and dropout rack mounts - Anything Cage mounts on front of fork - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Steel - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 1190 g - Wheel Size: 27.5+ , 29" , 700c - Maximum Tire Clearance (Fork): 3