Electronics

Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.

Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touchscreen-compatible pocket fits phones up to 6.5-inches (16.5cm) - Velcro attachment to top tube - Cargo capacity: 30.5 cu in (0.5L) - Dimensions: 16cm (l) x 8cm (w) x7cm (h) - Attachment: Hook and loop strap - Fiber content: 100% Polyester

The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

The Bosch Purion is a minimalist on-board computer designed for anyone who wishes to focus on the most important information and prefers an uncluttered handlebar. The Purion displays the essentials and lets riders get all important information with a click of the thumb, while keeping hands on the handlebars. Five different riding modes provide just the right amount of assistance in every situation. - Manages four levels of assist from Eco to Turbo, with an eMTB mode specially designed for the Performance Line CX Drive system - Features include charging status, speed, riding mode, range, trip distance and total distance

Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes

Keep an eye on your speed, distance and more with wireless ease when Bontrager's GOTime cycling computer is clipped to your bars. Set-up is a breeze; the large LCD screen is easy to read and the integrated clip mount allows you to instantly remove the computer and throw it in your pocket when you reach your destination.

Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices

The adapter puck is required for mounting Wahoo head units to the Pro Blendr Alloy Computer Mount. - Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Wahoo Adapter Puck for secure mounting of your Wahoo head unit. Blendr is an elegant, integrated accessory mounting solution - For use with Wahoo head units and Pro Blendr Alloy Computer Mount - Removable design alloys quick and easy adapter puck replacement

A simple, user-friendly cycling computer that displays speed, distance, and even calories burned. The Bontrager RIDEtime Computer gives you the ride metrics that matter most in a sleek, user-friendly package. A large, easy-to-read screen makes it simple to track your speed, time, and distance, and more! Product details - Intuitive one-button control with hands-free scroll mode - 2" screen size with easy-to-read digital display - Trek Certified Service reminders based on selected bicycle type - Key features include speed (current, avg., max.), distance (trip, total), time (clock, timer), and calories burned - Sensor includes magnet guidelines to simplify setup and installation - Includes mount, analog sensor, CR 2032 battery, and wheel speed magnet

An elegant ANT+ cycling computer that’s simple to set up, intuitive to operate, and has a large, easy-to-read screen. Know your ride Change the way you ride with the RIDEtime Elite Cycling Computer. It's easy to pair with compatible ANT+ sensors for real-time speed, cadence, and power data so you can target more productive workouts and better recovery rides. Simple setup and an intuitive one-button interface get you riding faster, while features such as auto start/stop and auto light control help you take charge of your ride. Product details - 2” easy-to-read screen features a programmable backlight and customizable tri-field display - Features auto start/stop, auto clear, and auto light control with customizable hands-free scan modes - Tri-field display lets you see three functions at once (speed, cadence, heart rate, power) - Displays Trek Certified Service reminders based on your selected bicycle type - Displays distance (trip/total), time (clock, timer), and calories burned - Track your speed, heart rate, power, cadence (current, average, max) - Includes sleek out-front mount and is also Blendr compatible - Requires ANT+ compatible sensor such as DuoTrap S or Interchange Combo Sensor - Battery: CR2032 (Coin) - Weight: 40g

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)

The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The DX version of the Omni RideCase holds tight and works with almost every smartphone having a 4.5” to 5.5” screen, with or without a case. High quality, ultra-elastic silicone grippers tenaciously hold your phone for convenient display. The included RideCase Mount rotates for portrait or landscape orientation. The Omni RideCase is compatible with other RideCase QuickClick mounts, like the RideCase CarMount or RideCase Armband. - Material: Ultra-elastic silicone/engineering grade plastic - Added Features: Angle adjustable Rotates for landscape or portrait viewing - Included mounts compatible with Topeak RideCase & PanoComp X - Mount: Included mounts for installation on handlebar, stem or stem cap - Weight: 26 grams - Size: 13.1 x 6.9 x 1.7 cm / 5.2” x 2.7” x 0.7” (Case)

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap - Size: 15.7 x 8.2 x 1.5cm / 6.2" x 3.2" x 0.59" - Weight: 35g / 1.23oz - Added Features: Integrated flipstand for landscape or portrait viewing angle adjustable rotates for landscape or portrait viewing

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

• Fits head & derailleur tubes to mount accessories on a USS (under-seat steering) recumbent

- Clear, water resistant phone pocket - Window measures 3.25 x 5.25" - Great for quick access while on bike - Quick release stem mounting system - Fits most stems - Bag volume: 90 c.i. - Size: 7.1x3.3x2.8"

Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0

Use this Sigma docking station to easily download ride data to your computer. The docking station is compatible with Sigma's Rox models 8.0, 9.0, 8.1, and 9.1.

Available in both wired and wireless, the BC 9.16 includes estimated calories consumed based on speed and duration. - Bike Functions: Current Speed, Average Speed, Trip Distance, Total Distance, Ride Time, Total Ride Time, Maximum Speed, Calories consumed - General Functions: Auto Start/Stop, Large easy-to-read Display, Seven Available Languages, Low Battery Indicator, Weatherproof Construction, Clock (12/24hr)

With its flat design, the cable-free EOX® VIEW 1300 fits discreetly into the overall image of the e-bike and ensures a clean looking cockpit. It’s equipped with a long-life battery, which allows it to be rotated out of the mount like a regular bike computer. The high-performance ANT+ and Bluetooth interface ensures a secure data connection. The three buttons at the bottom make the e-bike computer easy to use. The transflective FSTN display ensures ideal readability even in direct sunlight. An integrated sensor automatically adjusts display brightness relative to the ambient light. The EOX® VIEW 1300 can communicate with the EOX® app via BLE. - Ebike functions include: Assist Mode, range, speed, battery charge level, power produced, power comparison (power produced and motor power), cadence, light status (full/dimmed beam), gear indicator and change recommendation - Heart rate (with the BLE chest strap) and training indicator - Calories burnt - Segmented FSTN display - Navigation with komoot turn-by-turn instructions - E-system and smart phone connection, time, and date - Backlight - Remote control with EOX® Remote 500 (sold separately)

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

Connect your PC to CycleOps VirtualTraining.

It’s the best of both worlds. A light and stiff direct mount chainring with accurate Quarq power measurement elegantly hidden inside the DUB spindle lets you stealthily gather the data you need to progress. So you can focus your attention on the stunning finish of the carbon fiber crank arm. The wide chainline crankset fits in road and MTB bottom bracket standards so frames can fit wider gravel tires. FEATURES - DUB-PWR spindle-based unit measures left side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User replaceable AAA lithium battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands - Compatible with 135mm, 142mm and Boost rear spacing

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g